[SGVHAK] Raspberry Pi case

[Homan Chou]

So cool looking!

On Wed, Feb 6, 2013 at 12:24 AM, Tux Lab <project.tuxlab at gmail.com> wrote:

> Okay, I engraved the SGVHAK logo.  Big thanks to Homan and Jane.    The
> image was in jpg, but I was able to use Inkscape and traced the bitmap
> image to path for manipulating in Inkscape for printing to the laser
> engraver.
>
> I finally finished removing the shipping charges for SGVHAK members.   I
> think it should work.   Deciphering through layers and layers of crappy
> code took a while.   It was the typical just get it to work then come back
> and clean it up. . . except I never went back to clean it up and more crap
> piled on over the years.   Hopefully I didn't break anything in the
> process. . . .
>
> To remove the shipping charges, you have enter "SGVLUG" for the
> promotional code/tuxcode.    I added in an extra $3.00 to help offset the
> 9% CA/LAC sales tax.
>
> thanks,
>
> John
>
>
> On Tue, Jan 29, 2013 at 10:22 AM, Tux Lab <project.tuxlab at gmail.com>wrote:
>
>>
>> Now that we got the HAK logo, we can do that.   I'll try it later today
>> and post the result.
>>
>>
>> On Tue, Jan 29, 2013 at 5:29 AM, Lan Dang <l.dang at ymail.com> wrote:
>>
>>> will you bring some to HAK for people to buy off you? I am advertising
>>> HAK meeting a little differently this month, so I'd like to know.
>>>
>>> (Hey, maybe we can order a special HAK version with the logo?)
>>>
>>> Lan
>>>
>>>  ------------------------------
>>> * From: * Tux Lab <project.tuxlab at gmail.com>;
>>> * To: * Hardware Hacking Special Interest Group <hak at sgvhak.net>;
>>> * Subject: * Re: [SGVHAK] Raspberry Pi case
>>> * Sent: * Tue, Jan 29, 2013 8:17:47 AM
>>>
>>>   Okay, I removed an extra 3mm of material for the SD card pocket and
>>> the acrylic floor stand off is also around 3mm, so that will give
>>> about 6mm of clearance for the half length micro-SD card adapter.
>>>
>>> If anyone is interested in the case, the how it's made section is at,
>>>
>>> http://tux-lab.com/tux_project_detail?id=10
>>>
>>> The product page where you will find the supporting documents, ie CAD,
>>> component Country of Origin, aluminum MTR, and etc is at
>>>
>>> http://tux-lab.com/product_detail?id=4  .. . this part is incomplete,
>>> but I will fill in the missing information over the next couple days
>>>
>>> Finally, the shameless commercial site to buy the case is at,
>>>
>>> http://www.thecuriouspenguin.com/detail?id=24
>>>
>>> thanks,
>>>
>>> John
>>>
>>>
>>> On Mon, Jan 21, 2013 at 11:01 AM, James McDuffie <mcduffie at pitfall.org>
>>> wrote:
>>> > According to the Adafruit website:
>>> > "Protrudes from edge of Raspberry Pi 3mm with microSD card installed
>>> >
>>> > Thickness (clearance required from bottom of Raspberry Pi): 5.5mm"
>>> >
>>> > http://www.adafruit.com/products/966
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sgvhak.net/pipermail/hak/attachments/20130206/25b4293b/attachment.html>